JAT Paints Wallz Interior Emulsion Brilliant White

Description

EMULSION PAINT FOR INTERIOR USE

Wallz Interior Emulsion is a premium emulsion for interior walls and ceilings.
The low sheen formulation offers outstanding opacity and whiteness.

PREPARATION

For freshly prepared surfaces, please use acrylic wall filler as an undercoat.
Ensure surfaces are clean, dry and free from loose, powdery or flaking material, efflorescence,dirt, grease, wax and polish. Treat organic growth with a proprietary fungicidal treatment.Surfaces should be properly sealed with interior acrylic wall filler.
For further advice contact the manufacturer.
APPLICATION

Stir before use and mix with up to 40% clean water.
Apply by brush, roller or airless spray.
Apply 1 or 2 coats of Wallz Interior Emulsion, to the prepared surface, as required.
SPREADING CAPACITY

Up to 21㎡2 (225 ft2) per litre dependent on surface texture aporosity.
DRYING

Surface dries in 15-30 minutes.
Can be recoated after 2-4 hours under normal drying conditions.
CLEANING

Clean equipment with water immediately after use (remove as much paint as possiblefrom application equipment before cleaning).
TRANSPORTATION AND STORAGE

Ensure this container is stored upright and secured at all times.
JAT Holdings PLC will not accept liability for any damage caused by spillage.
SAFETY,HEALTH AND ENVIRONMENTAL INFORMATION

Keep out of reach of children.
Ensure good ventilation during application and drying.
Should contact with skin occur,wash with plenty of soap and water ora proprietary skin cleanser.
In case of contact with eyes, rinse with plenty of water and seek medicaladvice immediately.
Do not empty the content into drains, watercourses or access routes to septic tanks.

Certiied company for

ISO 9001:2015
ISO 14001:2015
ISO 45001:2018

Up to 40% of water by volume of Paint
Coverage on a smooth surface
Apply with a brush or a roller
Stir thoroughly before use
Wash equipment with clean cold water
Recoat in 2-4 hours